Comment:	Bat=3.68V 56%
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	46°47.87' N 11°56.23' E - locator JN56XT21LL - show map 232.5 m North bearing 16° from Brunico - Bruneck (Brunico), Provincia di Bolzano, Trentino-Alto Adige, Italy [?] 3.5 km West bearing 278° from Perca - Percha (Perca), Provincia di Bolzano, Trentino-Alto Adige, Italy 66.0 km Southeast bearing 141° from Innsbruck, Tyrol, Austria 139.1 km Southwest bearing 217° from Salzburg, Salzburg, Austria
Last position:	2025-12-05 18:39:29 UTC (8h ago) 2025-12-05 19:39:29 CET local time at Brunico - Bruneck, Italy [?]
Altitude:	887 m
Speed:	6 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	IN3JIB-5>APLRT1 via WIDE1-1,qAO,IN3PBO-10
Positions stored:	9332
Other SSIDs:	IN3JIB-10 IN3JIB-11 IN3JIB-14 IN3JIB-7 IN3JIB IN3JIB-12 IN3JIB-4 IN3JIB-15

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.