Comment:	RX-only iGate - SE Indy (Wanamaker)
Last beacon:	KC9ZMA-10 Winlink LinuxRMS Gateway, http://digipi.org/
Location:	39°42.86' N 86°01.55' W - locator EM69XR61VK - show map 5.5 km East bearing 99° from Beech Grove, Marion County, Indiana, United States [?] 9.0 km Southwest bearing 221° from Cumberland, Marion County, Indiana, United States 12.8 km Southeast bearing 118° from Indianapolis, Marion County, Indiana, United States 74.6 km Northeast bearing 35° from Bloomington, Monroe County, Indiana, United States
Last position:	2026-01-26 11:07:25 UTC (15m27s ago) 2026-01-26 06:07:25 EST local time at Beech Grove, United States [?]
Device:	WB2OSZ: DireWolf
Last path:	KC9ZMA-10>APDW18 via TCPIP*,qAC,T2TEXAS
Positions stored:	2
Other SSIDs:	KC9ZMA-2 KC9ZMA
APRS igate – Statistics for 2026-01:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2026-01-25 20:47:53 UTC (14h34m ago)
Position packets heard directly:	4 on radio path
Position packets sent to APRS-IS:	11 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.