Comment:	Raspberry Pi APRX Rx-only iGate
Last status:	109.962 up:177:04:53:48 load 0.30 0.22 0.19
Location:	43°08.35' N 89°18.95' W - locator EN53ID23CJ - show map 5.7 km Northeast bearing 66° from Maple Bluff, Dane County, Wisconsin, United States [?] 8.7 km North bearing 10° from Monona, Dane County, Wisconsin, United States 10.1 km Northeast bearing 43° from Madison, Dane County, Wisconsin, United States 114.9 km West bearing 276° from Milwaukee, Milwaukee County, Wisconsin, United States
Last position:	2026-01-14 01:48:04 UTC (5m41s ago) 2026-01-13 19:48:04 CST local time at Maple Bluff, United States [?]
Last telemetry:	2026-01-14 01:50:14 UTC (3m31s ago) – show telemetry Avg 10m: 0 Rx Erlang, Avg 10m: 0 Tx Erlang, RxPkts: 0 count/10m, IGateDropRx: 0 count/10m, TxPkts: 0 count/10m
Device:	Kenneth W. Finnegan, W6KWF: Aprx (igate, Linux/Unix)
Last path:	KB9TEN>APRX29 via TCPIP*,qAC,T2LANE
Positions stored:	3
Last heard a station directly:	2025-12-19 11:15:43 UTC (25d 14h38m ago)
Normal receiver range estimate:	70 km (Updated: 2025-12-19 11:15:43 UTC)

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.