Comment:	ARDUINO LoRa Digipeater
Location:	33°01.96' S 71°34.24' W - locator FF46FX12MD - show map 2.0 km Southwest bearing 243° from Viña del Mar, Provincia de Valparaíso, Valparaíso, Chile [?] 5.3 km East bearing 82° from Valparaíso, Provincia de Valparaíso, Valparaíso, Chile 97.8 km Northwest bearing 299° from Santiago, Provincia de Santiago, Metropolitana, Chile 112.3 km Northwest bearing 305° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile
Last position:	2025-04-07 13:40:27 UTC (11d 21h ago) 2025-04-07 09:40:27 -04 local time at Viña del Mar, Chile [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	CA2RXU-3>APLRG1 via WIDE1-1,qAR,CE2GVM-10
Positions stored:	190
Other SSIDs:	CA2RXU-6 CA2RXU-15 CA2RXU-10 CA2RXU CA2RXU-13 CA2RXU-11 CA2RXU-2 CA2RXU-4 CA2RXU-12 CA2RXU-8 CA2RXU-7 CA2RXU-1 CA2RXU-5 CA2RXU-14 CA2RXU-9 CA2RXU-20 CA2RXU-16 CA2RXU-24

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.