Comment:	Rx-only iGate running on Raspberry Pi
Location:	51°24.76' N 6°51.28' E - locator JO31KJ29NA - show map - static map 3.0 km Southwest bearing 221° from Mülheim (Ruhr) (Muelheim (Ruhr)), North Rhine-Westphalia, Germany [?] 6.0 km South bearing 177° from Oberhausen, North Rhine-Westphalia, Germany 12.0 km West bearing 250° from Essen, North Rhine-Westphalia, Germany 53.7 km North bearing 353° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany
Last position:	2022-05-22 04:52:24 UTC (19m7s ago) 2022-05-22 06:52:24 CEST local time at Mülheim (Ruhr), Germany [?]
Device:	Kenneth W. Finnegan, W6KWF: Aprx (igate, Linux/Unix)
Last path:	DH5JG>APRX28 via TCPIP*,qAC,T2FRA
Positions stored:	19
APRS igate – Statistics for 2022-05:
Stations heard directly:	35 on radio path – show map
Last heard a station directly:	2022-05-22 02:35:14 UTC (2h36m ago)
Normal receiver range estimate:	30 km (Updated: 2018-08-31 22:46:16 UTC)
Position packets heard directly:	451 on radio path
Position packets sent to APRS-IS:	5103 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.