Comment:	LoRa APRS Repeater
Last status:	IN3ECS-11 rebooting
Location:	46°38.11' N 11°51.95' E - locator JN56WP32VK - show map 3.5 km Northwest bearing 323° from Badia - Abtei (Badia), Provincia di Bolzano, Trentino-Alto Adige, Italy [?] 5.1 km Southwest bearing 241° from La Valle - Wengen, Provincia di Bolzano, Trentino-Alto Adige, Italy 78.4 km Southeast bearing 153° from Innsbruck, Tyrol, Austria 122.4 km North bearing 12° from Vicenza, Provincia di Vicenza, Veneto, Italy
Last position:	2026-01-17 17:49:43 UTC (7m14s ago) 2026-01-17 18:49:43 CET local time at Badia - Abtei, Italy [?]
Last telemetry:	2026-01-17 17:49:43 UTC (7m14s ago) – show telemetry V_Batt: 3.790 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	IN3ECS-11>APLRG1 via WIDE1-1,qAR,IN3ECS-10
Positions stored:	1
Other SSIDs:	IN3ECS-10 IN3ECS-7 IN3ECS-9 IN3ECS-5

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.