Comment:	IZ2CDP op. Gianpiero
Location:	45°43.05' N 9°25.90' E - locator JN45RR12TE - show map 3.9 km Northeast bearing 40° from Cernusco Lombardone, Provincia di Lecco, Lombardy, Italy [?] 5.6 km Northeast bearing 34° from Osnago, Provincia di Lecco, Lombardy, Italy 33.9 km Northeast bearing 34° from Milan, Province of Milan, Lombardy, Italy 65.4 km West bearing 289° from Brescia, Provincia di Brescia, Lombardy, Italy
Last position:	2026-02-09 11:52:51 UTC (1d 8h ago) 2026-02-09 12:52:51 CET local time at Cernusco Lombardone, Italy [?]
Course:	202°
Speed:	2 km/h
Device:	R3ABM: BrandMeister DMR
Last path:	IZ2CDP-7>APBM1D via IR2UDM,DMR*,qAR,IR2UDM
Positions stored:	141
Other SSIDs:	IZ2CDP-D IZ2CDP-N IZ2CDP-B IZ2CDP-9 IZ2CDP IZ2CDP-Y IZ2CDP-10

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.