Comment:	,/W2 QTH: Pasco, WA
Location:	46°17.49' N 119°14.95' W - locator DN06JG09CX - show map 2.8 km East bearing 77° from Richland, Benton County, Washington, United States [?] 8.7 km East bearing 99° from West Richland, Benton County, Washington, United States 12.4 km Northwest bearing 316° from Kennewick, Benton County, Washington, United States 102.2 km East bearing 109° from Yakima, Yakima County, Washington, United States
Last position:	2025-12-03 16:31:02 UTC (2d 30m ago) 2025-12-03 08:31:02 PST local time at Richland, United States [?]
Device:	KA2DDO: YAAC (software)
Last path:	KB7TU-10>APJYC1 via TCPIP*,qAC,T2LANE
Positions stored:	142
Other SSIDs:	KB7TU-4 KB7TU-7 KB7TU KB7TU-12
APRS igate – Statistics for 2025-12:
Stations heard directly:	2 on radio path – show map
Last heard a station directly:	2025-12-03 16:51:46 UTC (2d 9m ago)
Position packets heard directly:	3 on radio path
Position packets sent to APRS-IS:	6 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.