Comment:	XASTIR via Raspberry PI
Location:	41°11.50' N 82°03.50' W - locator EN81XE36AA - show map 9.0 km South bearing 182° from Grafton, Lorain County, Ohio, United States [?] 13.8 km South bearing 199° from Eaton Estates, Lorain County, Ohio, United States 45.7 km Southwest bearing 222° from Cleveland, Cuyahoga County, Ohio, United States 146.6 km Southeast bearing 147° from Windsor, Ontario, Canada
Last position:	2026-01-06 15:20:18 UTC (3d 8h22m ago) 2026-01-06 10:20:18 EST local time at Grafton, United States [?]
Position ambiguous:	Precision reduced at transmitter by 2 digits, position resolution approximately 1.9 km.
Device:	Open Source: Xastir (software, Linux/Unix)
Last path:	KD8HAG-3>APX223 via K8YSE-1*,WIDE2-1,qAR,NV8P-1
Positions stored:	14
Other SSIDs:	KD8HAG-2 KD8HAG-4 KD8HAG

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.