Comment:	New user, learning aprs
Mic-E message:	Off duty
Location:	36°03.66' N 78°34.63' W - locator FM06RB04RP - show map 10.1 km Northwest bearing 294° from Youngsville, Franklin County, North Carolina, United States [?] 11.9 km Southeast bearing 125° from Creedmoor, Granville County, North Carolina, United States 31.5 km North bearing 14° from West Raleigh, Wake County, North Carolina, United States 32.6 km North bearing 10° from Raleigh, Wake County, North Carolina, United States
Last position:	2026-01-06 17:53:22 UTC (4d 21h32m ago) 2026-01-06 12:53:22 EST local time at Youngsville, United States [?]
Course:	114°
Speed:	0 km/h
Device:	Kenwood: TH-D75 (ht)
Last path:	KR4ILF-7>SVPS6V via WIDE1-1,WIDE2-1,qAR,N4EWE
Positions stored:	6

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.