Comment:	Experimental digipeater
Last status:	https://github.com/richonguzman/LoRa_APRS_RP2040 2025.01.04
Location:	53°26.66' N 2°09.45' W - locator IO83WK16CO - show map 7.9 km North bearing 16° from Cheadle Hulme, England, United Kingdom [?] 9.6 km North bearing 3° from Bramhall, Borough of Stockport, England, United Kingdom 54.4 km East bearing 86° from Liverpool, City and Borough of Liverpool, England, United Kingdom 108.4 km North bearing 351° from Birmingham, City and Borough of Birmingham, England, United Kingdom
Last position:	2025-12-06 10:45:17 UTC (7m8s ago) 2025-12-06 10:45:17 GMT local time at Cheadle Hulme, United Kingdom [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	M0RDN-13>APLRG1 via WIDE1-1,qAR,M0RDN-10
Positions stored:	4
Other SSIDs:	M0RDN-1 M0RDN-10 M0RDN-4 M0RDN-15 M0RDN-5 M0RDN-9 M0RDN-4 M0RDN-2 M0RDN-7 M0RDN-7 M0RDN-9

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.