Comment:	Bat=3.66V 55% S=37
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11s
Location:	49°56.28' N 16°52.98' E - locator JN89KW55WC - show map 3.3 km West bearing 264° from Bludov, Olomoucký Kraj, Czech Republic [?] 3.5 km Southeast bearing 150° from Olšany, Olomoucký Kraj, Czech Republic 84.9 km North bearing 13° from Brno, South Moravian Region, Czech Republic 100.8 km West bearing 277° from Ostrava, Moravskoslezský Kraj, Czech Republic
Last position:	2026-01-02 16:28:22 UTC (28d 36m ago) 2026-01-02 17:28:22 CET local time at Bludov, Czech Republic [?]
Altitude:	344 m
Speed:	110 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	OK2MNL-25>APLRT1 via WIDE1-1,qAR,OK0X-10
Positions stored:	664
Other SSIDs:	OK2MNL-18 OK2MNL-17 OK2MNL-24 OK2MNL-19 OK2MNL-8 OK2MNL-12 OK2MNL-23 OK2MNL-7 OK2MNL-2

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.