Comment:	438.950MHz Frankie on tour TM-D710 VA
Mic-E message:	En route
Location:	49°55.95' N 14°23.25' E - locator JN79EW63MT - show map 5.7 km Southeast bearing 122° from Černošice, Středočeský Kraj, Czech Republic [?] 6.0 km East bearing 86° from Všenory, Středočeský Kraj, Czech Republic 17.4 km South bearing 188° from Prague, Hlavní Mesto Praha, Czech Republic 144.5 km Southeast bearing 133° from Chemnitz, Direktionsbezirk Chemnitz, Saxony, Germany
Last position:	2025-12-25 19:37:26 UTC (3h22m ago) 2025-12-25 20:37:26 CET local time at Černošice, Czech Republic [?]
Altitude:	264 m
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.2 m.
Course:	312°
Speed:	9 km/h
Device:	Kenwood: TM-D710 (rig)
Last path:	OK4FD>TY5U9L via WIDE1-1,WIDE3-3,qAO,OK1TI-10 This station is transmitting packets with a configured path of over 3 digipeaters. This causes serious congestion in the APRS network and errors when plotting the station's route on a map. Please consider using a path of WIDE1-1,WIDE2-1 or WIDE2-2, or even WIDE1-1,WIDE2-2 if you are moving very far away from an iGATE.
Positions stored:	120967

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.