Station info for PE1KHX-10 – aprs.fi

Station info - map view · info · telemetry · weather · raw · status · beacons · messages · bulletins · browse · moving · my account

It is possible to search using wildcards (*?) after a prefix. Example: OH*

APRS igate – Statistics for 2025-12:
Comment:	LoRa APRS, RX 433.775 MHz
Location:	51°27.88' N 3°34.40' E - locator JO11SL81TM - show map 2.5 km North bearing 360° from Vlissingen, Gemeente Vlissingen, Zeeland, Netherlands [?] 4.8 km Southwest bearing 215° from Middelburg, Gemeente Middelburg, Zeeland, Netherlands 87.0 km Northwest bearing 322° from Brussels, (Bruxelles-Capitale), Brussels Capital Region, Belgium 135.5 km Southwest bearing 222° from Amsterdam, Gemeente Amsterdam, North Holland, Netherlands
Last position:	2025-12-06 02:57:43 UTC (21m8s ago) 2025-12-06 03:57:43 CET local time at Vlissingen, Netherlands [?]
Last telemetry:	2025-06-11 13:51:32 UTC (177d 13h27m ago) – show telemetry V_Batt: 3.740 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	PE1KHX-10>APLRG1 via TCPIP*,qAC,T2CHILE
Positions stored:	903
Other SSIDs:	PE1KHX-9 PE1KHX PE1KHX-7 PE1KHX-1
Stations heard directly:	2 on radio path – show map
Last heard a station directly:	2025-12-05 13:52:53 UTC (13h25m ago)
Position packets heard directly:	7 on radio path
Position packets sent to APRS-IS:	8 – show map

callsign		pkts	first heard - UTC	last heard	longest	(rx => tx)	longest at - UTC

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.