Comment:	LoRa APRS Tracker Ext=2.15V
Last status:	Tracker started QRG PL EU UK RX 439.9125MHz 300bps
Last beacon:	..::| Experimental Arduino-APRS |::..
Location:	44°59.38' N 7°30.32' E - locator JN34SX07PM - show map 7.2 km Southwest bearing 239° from Beinasco, Provincia di Torino, Piedmont, Italy [?] 10.7 km West bearing 267° from Nichelino, Provincia di Torino, Piedmont, Italy 16.8 km Southwest bearing 238° from Torino, Provincia di Torino, Piedmont, Italy 130.1 km Northwest bearing 300° from Genova, Province of Genoa, Liguria, Italy
Last position:	2025-12-05 12:22:36 UTC (2m7s ago) 2025-12-05 13:22:36 CET local time at Beinasco, Italy [?]
Last telemetry:	2025-12-05 12:22:36 UTC (2m7s ago) – show telemetry V_Bat: 0 VDC, V_Ext: 0 VDC
Device:	Damian, SQ2CPA: LoRa APRS
Last path:	SP8OBQ-14>APLRFT via WIDE1-1,WIDE2-1,qAO,IZ1MEU-10
Positions stored:	141214
Other SSIDs:	SP8OBQ-4 SP8OBQ-7 SP8OBQ-8

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.