Comment:	LoRa Bike Tracker Bat=3.78V 64%
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	34°52.42' S 138°36.58' E - locator PF95HD30DH - show map 2.4 km West bearing 285° from Klemzig, Port Adelaide Enfield, South Australia, Australia [?] 5.4 km West bearing 270° from Paradise, Campbelltown, South Australia, Australia 6.2 km North bearing 9° from Adelaide, Adelaide, South Australia, Australia 9.8 km Northwest bearing 295° from Adelaide Hills, Adelaide Hills, South Australia, Australia
Last position:	2026-01-18 23:43:35 UTC (14h32m ago) 2026-01-19 10:13:35 ACDT local time at Klemzig, Australia [?]
Course:	276°
Speed:	0 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	VK5EME-9>APLRT1 via WIDE1-1,qAO,VK5LO-5
Positions stored:	2050

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.