Comment:	Arduino APRS Tracker
Location:	34°08.97' S 138°24.98' E - locator PF95EU94XC - show map 636.0 m Southeast bearing 135° from Balaklava, Wakefield, South Australia, Australia [?] 33.1 km North bearing 345° from Mallala, Mallala, South Australia, Australia 88.2 km North bearing 349° from Adelaide, Adelaide, South Australia, Australia 88.7 km North bearing 342° from Adelaide Hills, Adelaide Hills, South Australia, Australia
Last position:	2026-01-23 23:31:02 UTC (2d 4h20m ago) 2026-01-24 10:01:02 ACDT local time at Balaklava, Australia [?]
Altitude:	55 m
Device:	Unknown: Experimental
Last path:	VK5IS-5>APZMDM via WIDE1-1,WIDE2-2,qAR,VK5ATN-2
Positions stored:	18

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.