Comment:	PLXDigi U=13.6V. WCSAR-3 Base Repeater
Location:	51°53.52' N 124°37.64' W - locator CO71QV44RB - show map
Last position:	2024-10-15 15:30:07 UTC (19m16s ago)
Last telemetry:	2024-10-15 15:21:01 UTC (28m22s ago) – show telemetry Vin: 13.650 Volt, Rx1h: 0 Pkt, Dg1h: 0 Pkt, Temp: 0 C, I1: 0 mA  O1     O2     O3     O4     I1     I2     I3     I4
Device:	Microsat: PLXDigi
Last path:	WCSAR-3>APMI03 via SAPEYE-1,VEDAN,WIDE2*,qAR,VE7SML-4
Positions stored:	1
Other SSIDs:	WCSAR-4 WCSAR-8 WCSAR-1 WCSAR-15 WCSAR-2
APRS digipeater – Statistics for 2024-10:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2024-10-15 14:20:19 UTC (1h29m ago)
Position packets heard directly:	68 on radio path

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.